Zirconium Fidget Slider Guide: 8 In-Stock Picks (2026)

What you're actually buying

Zirconium sliders are bought for one look: a deep, glossy black that isn't paint. Before spending $100 to $500 on one, it helps to know what that black is, what the metal weighs, and how it ages. Our materials guide compares every common slider metal side by side; this page is only about zirconium, with real listings.

Three facts do most of the work:

• The metal is soft, the skin is hard. Urban EDC gives metallic zirconium a Mohs hardness of 5 to 5.5 and warns not to confuse it with zirconia, the ceramic used in some kitchen knives (Urban EDC). The black oxide on top is much harder: a jewelry reference puts it at about 8 to 8.5 on the Mohs scale (Skyjems).
• The black is grown, not applied. The same reference describes heating zirconium to roughly 600 to 700 °C so that a zirconium oxide layer 3 to 5 micrometres thick forms on the surface. Urban EDC describes makers torching polished parts until they glow red and letting them cool in air, and says the oxide "becomes part of the zirconium."
• It is not the heaviest option. Zirconium is heavier than titanium but lighter than steel. If pure heft is the goal, see the weights below before paying the zirconium premium.

Eight zirconium sliders in stock

Every price, weight and size here comes from the listing, checked on September 28, 2026. We only list variants that were in stock that day.

Mechanical and infinite sliders: $109 to $199

JZEDC Jumping Candy ($109). The cheapest real zirconium body we found. It's a vertical push slider on a PEEK track that JZEDC says makes a crisp "ding, ding, ding" as it moves (JZEDC). At about 41 g it's light for zirconium, because most of the mechanism is polymer.

JZEDC Alpha ($199). An infinite slider with a hollowed zirconium alloy shell, a stainless baseplate and brass spring plates for vibration feedback; 50 g (JZEDC). Its sibling, the ZD, is the same price and 40 g (JZEDC). Notice that only the shell is zirconium. That's normal for this style, but it means you're buying the look more than the mass.

Magnetic sliders: $160 to $479

Natrix EDC Haptic Slider ($160). A flat 46 × 16 × 9 mm bar with a patterned face and a shaped back, designed and made in-house in Lithuania (Natrix EDC). The useful thing about Natrix is that the identical design is sold in other metals: brass for $92 and titanium for $115 (brass, titanium). That gives a clean read on what zirconium itself adds to the price.

Magnus ZA series ($277 to $347). Magnus sells numbered zirconium sliders on a common 48 × 30 mm platform, each with zirconium plates, titanium screws and a 2 × 4 magnet layout that gives three clicks (Wideboy). What changes between them is thickness, pattern and finish:

• Wideboy is the thinnest at 12.5 mm and 80 g, in a "Battleworn (Blackout + Blue)" finish.
• ToadX is 91 g with a Battleworn blackout finish (ToadX).
• Egg Slicer is the chunkiest at 17.3 mm and 98 g, machined blackout (Egg Slicer).
• Spider is the lightest at 76 g and the priciest at $347. It is also the only one listed with N42 magnets instead of N52, which should make its pull a little softer (Spider).

Individual numbers come and go. If one is gone, another on the same platform with a similar thickness and the same magnet grade should feel close, so don't chase a specific number.

Magnus x URBAN Inverse Turtle ($479). A collaboration sold through Urban EDC with a blackout zirconium body, zirconium plates machined with Urban's wave pattern, and three-click action, made in Magnus's New Zealand facility (Urban EDC). You're paying for the collaboration and the milling detail; the feel will be close to the regular Magnus pieces.

Weight: lighter than steel, heavier than titanium

Several sliders list weights for every metal version, even when some versions are sold out. Here's what the listings say:

Sources: MOT Mix, Chenyu Guardian, Muyi Eraser, all on MetaEDC.

The pattern is consistent: zirconium versions are about 16 to 26 percent lighter than the stainless versions and about a third heavier than titanium. Urban EDC puts zirconium at about 44% denser than Grade 5 titanium. If you want a planted slider without steel's full weight, that's zirconium's sweet spot. If you want maximum weight, stainless or brass gets you there for less.

Price: what zirconium adds

Same design, different metal, on the listings above:

• Natrix Haptic Slider: brass $92, titanium $115, zirconium $160.
• Chenyu Guardian: stainless $99.95, titanium $119.95, zirconium $129.95.
• MOT Mix: stainless $219.95, zirconium black $329.95, zirconium "Colorful" $399.95, zircuti $479.95.
• Mackie CP2S: aged stainless $139.95, zirconium plus stainless $259.95 (MetaEDC).

So zirconium adds anywhere from about $10 to over $100 over steel on the same design. The small gap on the Guardian and the big one on the MOT Mix show that the premium comes as much from finishing work and limited runs as from the metal. Urban EDC lists the cost drivers: restricted supply, flammable machining dust, and careful polishing and heat treatment.

Finishes on listings, decoded

• Blackout / polished black. The classic glossy oxide. Looks best, shows fingerprints most.
• Frosted or stonewashed zirconium. A matte texture instead of the gloss. Fingerprints show less, though Urban EDC notes that polished finishes hide light scratches better than sanded ones.
• Battleworn. A Magnus finish name; the listings don't describe the process, so judge it from the photos.
• Colorful or blue accents. Heat-colored zirconium, such as MOT's "Zirconium Colorful" or Magnus's "Blackout + Blue."
• Zircuti / Timascus with zirconium. Layered titanium alloys with at least one zirconium layer; heat turns the zirconium dark and the titanium blue and purple (JBlunt Designs, Urban EDC).
• "Zirconium alloy." JZEDC's wording. Ask the seller which alloy if it matters to you; the listings don't say.

How it ages

A ring maker sums up the good news: the black layer "will not fade over time, tarnish, or change colors" (Revolution Jewelry). Normal pocket carry leaves it looking close to new.

The bad news is that the oxide is micrometres thick. When something hard cuts through it, the scratch is silver on black, which is more obvious than the same scratch on titanium. Keys and coins in the same pocket are the usual culprit. And any polishing removes the black completely; per the Skyjems entry, getting it back means redoing the heat treatment.

Knife owners sometimes re-blacken a scratch with a propane torch, and Urban EDC describes that repair. Don't try it on an assembled slider. Standard neodymium magnet grades are rated for use up to about 80 °C, and their resistance to demagnetization drops sharply above 100 °C (Wikipedia), far below the temperatures needed to grow oxide. Ask the maker whether they refinish, or treat the silver scratch as part of the slider's history.

For more on day-to-day care, see how to clean a fidget slider.

Common mistakes

• Buying zirconium for weight. Stainless and brass versions of the same designs are heavier and cheaper.
• Assuming "zirconium" means all zirconium. On the JZEDC Alpha only the shell is; on the Mackie CP2S it's zirconium plus stainless. Read the materials line.
• Carrying it with keys. The oxide shrugs off fabric and fingers, not steel edges.
• Counting on a variant you saw once. Zirconium versions tend to go first: on the MOT Mix, Chenyu Guardian and Muyi Eraser listings, every zirconium variant was sold out when we checked, while some steel or titanium versions were still available.

Where echoPi fits

Every slider above has fixed clicks: Magnus's 2 × 4 layout gives three, and that's what you live with. echoPi, which is in development, takes a different route, with seven real clicks as a design target that you can place and program yourself, and sounds you can preview on our site. There's no final material or price yet. If you want to hear when there is, join the list.